|
|
| Sell 3ch Programmable Switching Power Supply |
| |
 |
Triple Output
* DUAL Voltage, Ampere: DC+30V/3A, DC-30V/3A.
* Fixed Voltage, Ampere: DC 5V/2A.
Output: ON / OFF Control
Key Lock: Key Lock to Avoid Error Operation
Protection: Overload Voltage, Ampere Protection: (SMPS)
Protect over heat and Overload
CC, CV Set: AUTO Set
Tracking: AUTO Tracking
14bit Programming and the voltage, the read back of the current.
Programming that can do up and down fast.
High Efficiency and High Power Density
Standard Commands for Programmable Instruments (SCPI).
Setup: Setting and functions may be selected and stored in memory from
the front panel. Eight setups may be stored in memory.
Equipment: Displays information about your instrument including the Model
number, serial number, Calibration date, GP-IB address
and Firmware revision.
Remote Control: Function and ranges may be controlled from a PC via
the RS232 or the optional GP-IB interface.
Display: 128 by 64 pixel Super Twisted LCD display
Power Source: May be used with any line voltages from
85V to 270Vac (+-10%, 48 to 66Hz) without any internal changes.
The P6100 is a high performance and low cost programmable power supply. It is designed by a high-tech team. This instrument combines the bench-top and system features which provides a versatile solution for your testing requirements now and in the future.
Specifications
CHANNEL 3 Channel (Two variable, One fixed)
Output Voltage 0 to +30V (Continuously variable)
0 to -30V (Continuously variable)
Fixed 5V
Current Dual 0 +- 3A
Fixed 2A
Resolution Voltage 10mV
Current 1mA
Operating Mode Constant Voltage (CV)
Constant Current (CC)
Ripple and Noise 50mV rms
Load Regulation 0.1% (at V = 15V, I = 1A)
Line Regulation 1mV/V
Programming Accuracy 0.5% of value +- 3 digits
Read back Accuracy 0.2% of value +- 3 digits |
|
chinapower.com
